TIMEX iQ+ Move Multi-Time FEATURES
Your Timex iQ+ Move Multi-Time timepiece is the best of both worlds.
It gives you the beauty of a classic analog watch, and the ability to track
multiple metrics including: steps, distance, calories and sleep.
Classic Analog Design
Bluetooth Low Energy (BLE) connection with smartphone app (iOS and Android OS)
Multiple time zones displayed
Activity tracking can be displayed on watch dial in both steps and distance
Sleep tracking measures time slept as well as level of sleep displayed on smartphone app
Alarm and countdown timer controlled by smartphone app
Smartphone app retains activity and sleep data and displays it by day, week, month or year
INDIGLO night-light
Estimated battery life of 1 year
This watch requires the use of a compatible iOS or Android
smartphone, and the
Timex Connected
smartphone app.
Go to http://www.timex.com/getstarted and download the Timex
Connected
mobile app to your smartphone.
OVERVIEW
NOTE: Pairing your watch and smartphone is performed during
the on-boarding steps below.
Do not attempt to pair devices from the smartphones manual Bluetooth
settings.
1. Download the Timex Connected app to your smartphone.
2. Make sure Bluetooth function is turned ON in your smartphone settings.
3. On your watch press and release the crown into the closed (pushed in) position.
4. On your smartphone, with your watch near your phone, follow the instructions in the app:
a. Open the Timex Connected app on your smartphone.
b. Accept the user agreement.
c. Select the iQ+ Move Multi-Time watch.
d. For Android only: give permission and accept device location.
e. Answer user profile questions to set up time zones, activity tracking and set goals.
f.
When prompted, press and hold the crown for 5
seconds, until the melody plays and all hands
move to ~12 oclock. Bluetooth function is now turned on.
g. From the list, select the iQ Move Multi-Time xxxxxx watch.
h. If a watch update is available, it will install automatically.
i. Follow app instructions to calibrate watch hands.
After completing these steps, your watch is synced with your
smartphone and set to the phone time,
with its activity and sleep tracking functions ready to use.
CHANGING THE
TIME
The time displayed on your watch is updated from
your phone upon successful initial completion
of the setup steps listed above. Every time the watch and smartphone app are
synced, the time will be updated.
To manually override the time on your watch, gently pull out
crown to outer position. The subdial hand will
point UP, indicating you will be
changing the time in the Primary
Time Zone (i.e., the time that shows normally on the main dial).
Rotate crown to set the time.
Pushing Button 2 will cause the subdial
hand to point DOWN, indicating you can change the
2nd Time Zone time. Rotate crown to set the time.
Then push the crown to the closed position to finish changing the time.
Following a sync, the times displayed on the watch main dial
and the subdial will return to showing
the phone time on the main dial, and the 2nd Time Zone on the subdial, as set by the phone app.
WATCH CROWN
POSITIONS
The watch crown has four positions.
One is the temporary push position. Push briefly to activate
the INDIGLO night-light and show the
Perfect Date feature. Push
longer than 5 seconds to activate Bluetooth function.
The other three are closed, middle and outer. Observe how
the watch hands change as you move
the crown: First extend the crown to its outer position, and then push the
crown very lightly until you
feel it click into the middle position, before pushing it to closed.
ACTIVATING
THE INDIGLO NIGHT-LIGHT
Press and hold the crown to activate the INDIGLO night-light. The light
will stay on for 2–3 seconds
after the crown is released. Pressing the crown for longer than 5 seconds will
activate sync mode and
hands will move to the 12 oclock positions.
WATCH BUTTONS
The watch has two buttons.
BUTTON1 at 2H
Temporarily switches time displayed on the sub-dial to the
main dial and switches the main dial time
to the sub-dial. Second hand displays perfect date of the 2nd time
zone.
BUTTON2 at 4H
The second hand temporarily displays total steps or total distance, as set in the app.
Pressing and holding both buttons simultaneously for more
than 10 seconds will sound a melody to
indicate you have put the watch into Airplane Mode. In this state, the watch
will not try to activate
Bluetooth automatically.
To cancel Airplane Mode, either depress and hold both
buttons for 10 seconds until a melody sounds,
or depress and hold the crown to activate Bluetooth.
SYNCHRONIZING
WATCH AND SMARTPHONE
Synchronization, or sync, does the following:
Transfers the previous 7 calendar days worth of activity and sleep tracking data from your watch to your phone.
Updates the watch time to match the smartphone time.
Sends other app settings, such as alarm, 2nd Time Zone to display, etc. to watch.
Sends other watch information, such as low battery, to smartphone.
Does not delete activity data, either during or after synchronization.
Checks for watch updates, and updates automatically.
NOTE: To prevent data loss, synchronize the watch to the smartphone app, a minimum of every six days.
NOTE: The watch must be within 2 meters (6.5 feet) distance of your smartphone for optimal communication.
To synchronize the watch and the smartphone:
5. Open the Timex Connected app on your smartphone.
6. On
your watch, push and hold the crown for 5 seconds until a melody sounds and the
hands move to 12 oclock position.
7. Immediately tap the sync icon on the lower right on the app.
8. Listen for the melody that indicates the watch has completed Bluetooth synchronization with the smartphone app.
NOTE: If the Bluetooth connection
between the smartphone app and the watch is disrupted,
re-pair the watch and smartphone as follows:
1. Tell your smartphone to forget the watch:
a. In your smartphones settings (not the Timex app), view Bluetooth devices.
b. Have your smartphone un-pair (forget or disconnect) your iQ+ Move MULTI-TIME watch.
c. Exit the Bluetooth settings.
d. Open the Timex Connected app and sync watch and smartphone.
By default, the second hand shows seconds as on any analog watch.
When the second hand is set to show seconds, pressing the
crown temporarily causes the
second hand to point to the current day of the month; for example, at 23 seconds
past the minute,
pressing the crown would cause the second hand to point to 10 on the tenth day
of the month.
You can set the second hand to show, instead of seconds, the
number of steps, distance, day of the month,
or 3rd Time Zone in 24 Hour Format. These settings are in the
smartphone app.
Set and turn on daily alarm on smartphone app. Sync to send
alarm setting to watch. When alarm sounds,
night-light flashes on watch. Press crown to silence, if crown is not pressed,
alarm will sound for 20 seconds.
Set and start Countdown Timer on smartphone app. Sync to
send to watch. Watch beeps and night-light
flashes when countdown ends. Press crown to silence, if crown is not pressed,
alert will sound for 20 seconds.
ADJUSTING STRIDE
LENGTH
The Timex iQ+ Move Multi-Time uses an algorithm
for distance measurement which automatically
determines your stride based on your height and speed. If you find the
distance reported does not match
your actual walking or running distance, you can calibrate the distance by up
to +/- 25% via the
smartphone app. You can do this through the distance-adjustment option on the
watch section of the app.
LOW BATTERY
POWER
The watch indicates when you need to replace the battery:
During synchronization of the watch with the
smartphone, the app will alert you if the battery
needs to be replaced soon.
The watch second hand will begin to move every 2
seconds in 2-second increments until the
battery is replaced.
When battery power is low:
To conserve power, the INDIGLO night-light will not function until the battery has been replaced.
The watch and smartphone will not communicate.
The activity tracking functions will remain functional until
the battery has been completely depleted,
but new data will not be stored.
REPLACING THE
BATTERY
Before replacing the battery, it is recommended that you synchronize to the
smartphone app to ensure
you have retrieved all of the latest activity and sleep data from the watch.
After the battery is replaced,
the watch will need to be re-calibrated with the smartphone.
STORING THE
WATCH
You may remove power from the watch for storage. To do this, pull the crown
out to the outer position.
With the crown in this position, the hour, minute and second hands will stop
immediately, and the
activity- and sleep-tracking functions will be inactive after 30 minutes.
SMARTPHONE
APP UPDATES
As smartphone app updates become available, you will be notified on your
smartphone, the same way
you learn of updates to other smartphone apps. Update this app using the same
process you would to
update any other app. Specific process varies by smartphone.
WATCH UPDATES
As watch updates become available, you will be notified in the Timex
Connected smartphone app.
Follow the instructions in the app.
NOTE: Because the update will delete all activity recorded
for the current day, performing the
update early in the day will minimize the loss of recorded activity.
To ensure an uninterrupted connection during the update,
place the watch and smartphone on a
flat surface, beside each other, and avoid moving them until the update
completes. During the
update, the lower subdial hand shows progress, from 0
to 100%.
The duration of the update varies, averaging 5 to 10 minutes, but sometimes lasting up to 30 minutes.
NOTE: To confirm that your watch is
water resistant, check for the
symbol before immersing in water.
Your iQ+ Move Multi-Time watch is water resistant to a depth of 50 meters (164 feet).
The watch is water resistant only as long as lens, push buttons and case remain intact.
The watch is not a diver watch and should not be used for diving.
Rinse the watch with fresh water after exposure to salt water.
Water Resistance Depth |
p.s.i.a.* Water Pressure Below Surface |
30m/98ft |
60 |
50m/164ft |
86 |
100m/328ft |
160 |
200m/656ft |
284 |
* pounds per square inch absolute
TIMEX
INTERNATIONAL WARRANTY
http://www.timex.com/productWarranty.html
.
This device complies with Part 15 of the FCC Rules.
Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
This device complies with Industry Canada license exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this
device must
accept any interference, including interference that may cause
undesired operation of the device.
Le prsent appareil
est conforme aux CNR dIndustrie Canada
applicables aux appareils
radio exempts de licence. Lexploitation
est
autorise aux deux
conditions suivantes : (1) lappareil
ne doit pas
produire de brouillage, et
(2) lutilisateur de lappareil
doit accepter
tout brouillage radiolectrique
subi, mme si le brouillage est
susceptible den compromettre
le fonctionnement.
Under Industry Canada regulations, this radio transmitter
may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada.
Caution – Any user
changes/modifications to this device could void the users authority to operate
this device.
Manufacturers Name: Timex Group USA, Inc.
Manufacturers Address:
555 Christian Road
Middlebury, CT 06762
United States of America
declares that the product:
Product Name: Timex iQ+ Move Multi-Time
Model Numbers: M329
is in conformity with the relevant EU harmonized
legislations.
This declaration is issued under the sole responsibility of the
manufacturer and conforms to the following:
R&TTE: 1999/05/EC – RED Directive 2014/53/EU
Standards:
CENELEC EN 61000-4-2: 2009
CENELEC EN 61000-4-3: 2006+A2:2010
CENELEC EN 55032: 2015/AC:2016-07
ETSI EN 300 440-1: V2.1.1 (2017-03)
ETSI EN 301 489-1: V1.9.2
ETSI EN 301 489-17: V2.2.1
LVD: 2006/95/EC – 2014/35/EU
Standards:
IEC 60950-1: 2005+A1:A2
CSA C22.2 #60950-1: 2007+A1:A2
CENELEC EN 60950-1: 2007:R10
Electromagnetic Compatibility (EMC) – Radio Frequency (RF)
Standards:
FCC 47CFR 15, Subpart C
IC RSS 102; Issue 4
IC RSS 210; Issue 89
IC RSS GEN Issue 4
AS/NZS 4268: 2017
Agent:
Sam Everett
Quality Regulatory Engineer
Date: 1 Aug 2017,
Middlebury, Connecticut, U.S.A.
2017 Timex Group USA, Inc. TIMEX, INDIGLO, PERFECT DATE and iQ+ are registered
trademarks of Timex Group B.V. and it subsidiaries in the US and other
countries.
The Bluetooth word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
and any use of such marks by Timex is under license. IOS is a trademark or registered
trademark of Cisco in the US and other countries and is used under
license. The Android
robot is reproduced or modified from work created and shared by Google and used
according to terms described in the Creative Commons 3.0 Attribution License.